Some precautions for installing environmentally friendly air conditioning

　　Nowadays, more and more people choose environmentally friendly air conditioners as ventilation and cooling equipment, but they often fail to achieve the desired results due to improper installation. Next, Keruilai Refrigeration Electric will tell you some precautions for installing environmentally friendly air conditioners.

　　1. When installing an environmentally friendly air conditioner, you must pay attention to the location of the installation. Generally speaking, an environmentally friendly air conditioner cannot be installed facing the door, because adding a negative pressure fan opposite the environmentally friendly air conditioner can more effectively improve the indoor air conditioner. cooling rate.

　　2. When installing environmentally friendly air conditioners, you should avoid places with odors, such as toilets, etc., and the installation location should be in a place with good ventilation.

　　3. The installation of environmentally friendly air conditioners must meet certain environmental conditions. The indoor temperature of environmentally friendly air conditioners should be between 18 degrees Celsius and 45 degrees Celsius. The relative temperature to the outside environment should be less than 85%. The indoor atmospheric pressure should be approximately 86kpa. -106kpa. If the value exceeds or falls below this value, it is not suitable to install an environmentally friendly air conditioner. The water supplied in the water pipe needs to be softened before it can be used, and the water temperature cannot be greater than 45 degrees Celsius.

　　4. When installing equipment, pay attention to leak-proof measures. After installing the environmentally friendly air conditioning unit, remove some dust and impurities remaining in the water pipes, and then connect the drainage pipes and power supply. If the drainage pipes are not connected properly, , never turn on the switch of Shenzhen environmentally friendly air conditioner, otherwise it will cause serious leakage.

　　5. When using environmentally friendly air conditioners, the voltage deviation should not be too large, and the voltage deviation should not exceed ±10% of the rated voltage (380v).

　　6. Finally, the indoor environment where environmentally friendly air conditioners are installed must be free of corrosive substances.