Keruilai Warm Reminder: Reasons for Affecting the Service Life of Water Cooled Air Conditioning

　　With the development of society, employees pay more and more attention to the working environment. Therefore, whenever summer comes, many manufacturers turn on water-cooled air conditioners to improve the working environment of employees and improve work efficiency. Water-cooled air conditioners have become a must-have in modern factories and workshops. One of them.

　　When manufacturers install water-cooled air conditioners to ventilate and cool down the workshop, they will also consider a question. If the water-cooled air conditioner is installed directly outdoors, will the sun and rain damage the machine? In this regard, Keruilai can speed up everyone. If the Keruilai environmentally friendly air conditioner is placed in the outer shell It will not be damaged when exposed to the sun or rain outside. Our outer shell is made of solid PP environmentally friendly engineering plastic shell, which is anti-aging and anti-ultraviolet. In fact, with reasonable use and proper maintenance, water-cooled air conditioners can be used for about 10 years.

　　Below, Keruilai lists some factors that affect the service life of water air conditioners /water-cooled air conditioners for your reference:

　　1. The electronic control system has low technological content and cannot automatically clean dirt and cannot identify the degree of dust blockage, which may lead to the occurrence of various failures.

　　2. Usually you don’t pay attention to the maintenance of water-cooled air conditioners.

　　3. The quality of motors and special electrical accessories is poor.

　　4. The installation iron frame, air supply duct, special air outlet, and special air nozzle are made of poor materials and have a short service life.

　　5. If the user uses it incorrectly, it can easily cause damage to the environmentally friendly air conditioner and shorten its service life.

　　6. The dust filter or evaporation hole of the wet curtain is clogged and is not cleaned regularly.

　　7. The injection molded body, air duct, and fan blades are made of poor materials and unreasonable structural design, resulting in small air volume, low wind pressure, high noise, and short service life.

　　8. Dirt continues to accumulate in the bottom basin of the machine, and manual cleaning is not performed regularly.

　　Recommended related content:

　　Share the cleaning methods of industrial air conditioners

　　Correct operation methods for maintenance and cleaning of Keruilai environmentally friendly air conditioning wet curtains