What is the best air outlet method for environmentally friendly air conditioning?

　　The air outlet directions of the environmentally friendly air conditioner main unit are divided into three types: upper air outlet, lower air outlet, and side air outlet. So what is top air outlet? What is bottom air outlet and side air outlet? Which air outlet method is better to choose? Below,Keruilairefrigeration will give you a brief introduction.

　　Out of the wind

　　Bottom air outlet means that the air outlet of the environmentally friendly air conditioner is located at the bottom of the machine. The bottom air outlet machine is usually installed above the window, and then connected to the air duct elbow to send cold air into the room through the window.

　　Out of the wind

　　Top air outlet means that the air outlet of the environmentally friendly air conditioner is at the top of the machine. The installation position of the machine with upward air outlet is usually at a flat window, and then connected to the elbow of the air duct. The machine blows cold air from above and sends it into the room through the pipe.

　　Side air outlet

　　Side air outlet means that the air outlet of the machine is side air outlet. The difference between it and the upper and lower air outlet is that the side air outlet has only 3 water curtains, while the upper and lower air outlets have 4 water curtains. That is to say, in the same At the same power, the evaporation efficiency of side air outlet is 1/4 lower than that of upper and lower air outlet.

　　Which air outlet method is better to choose? Most customers give priority to the bottom air outlet environmentally friendly air conditioner , so the bottom air outlet is also a best-selling model. Some companies only rent one floor of the entire factory building, and the upper and lower floors are not the same company. At this time, they may consider using the upper air outlet. The advantage of choosing an upper air outlet is that it facilitates later maintenance. When installing an upper air outlet, the machine is right next to the window on your floor, and you can touch the machine with your hands while standing in the workshop. If you install a bottom air outlet or a side air outlet, you need to go down to the machine from a higher floor for maintenance and inspection, which will have a certain adverse impact on subsequent maintenance.