Safety precautions for using industrial large fans

　　Industrial large fans are energy-saving, environmentally friendly, and have good cooling effects. They are widely used in factories, workshops, waiting rooms, hospitals, learning and other places. However, because the large industrial fan is relatively large and operates very quickly, if an object accidentally touches it, it will cause mechanical damage, so safety protection measures must be taken. Specifically, when using large industrial fans for ventilation and cooling, you should pay attention to the following safety matters.

　　1. Pay attention to avoid leakage.

　　Since large industrial fans need to be energized, insulation measures must be taken, and the insulation performance of the product itself must meet the requirements, otherwise it will cause leakage accidents. This is one of the important causes of danger and is very likely to cause accidents. Electric shock may occur, so be careful. At the same time, relevant maintenance work must be done, because during use, the insulation may be damaged due to aging and leakage may occur. Therefore, it is necessary to check it every once in a while and take preventive measures.

　　2. Pay attention to installing protective net cover and avoid illegal operations.

　　If a large industrial fan rotates directly with bare metal, the rotating blade fan will pose a safety hazard. Therefore, in order to avoid this situation, a mesh cover must be placed around it, and the mesh size must be such that fingers cannot pass through it. In this case The staff's hands will not be injured. At the same time, we remind everyone that you must not work in violation of regulations in flammable and explosive places to avoid static electricity or flames, which may cause fire or explosion.

　　3. Pay attention to multiple safety measures to prevent the fan or blade from accidentally falling.

　　Since industrial electric fans are usually installed on the top of the workshop and rotate to provide ventilation and cooling, a number of reinforcement measures must be taken to ensure that the large industrial fans are firmly installed on the material racks and steel structures. During this process Not only should it be tightened with bolts, but additional steel wire ropes should be wrapped around the roof-related shelves to provide several additional reinforcement measures. At the same time, during use, regular inspections should be carried out to see if there is any looseness, so that problems can be discovered early and the problem of falling can be prevented.

　　The above three points are the safety precautions for using industrial large fans. Although it seems a bit cumbersome, safety is the top priority. In addition, everyone is reminded that if a large industrial fan becomes loose or leaks, you should immediately turn off the fan and report to the relevant agency for repair. If you find someone accidentally getting an electric shock, you must turn off the power immediately and take measures to rescue them. At the same time, you must protect yourself from the accident. on site.