How to maintain a household cooling fan?

　　Household cooling fans are currently very popular household cooling equipment and have gradually been widely used instead of traditional fans in recent years. Maintenance is an effective way to extend the service life of household cooling fans. Below,KeruilaiRefrigeration will share with you how to maintain household cooling fans.

　　One of the maintenance methods for household cooling fans

　　Pre-season maintenance: Before the start of the use season, check whether there are any obstructions around the unit and the air inlet. When using and maintaining the unit, pay attention to cleaning the chassis and press the "Clean" button every day to prevent bacteria and odors from occurring. Periodic maintenance of the unit, the unit runs for 1-2 months. If the wet curtain, filter screen is clogged or the chassis is too dirty, it should be cleaned regularly to avoid machine failure. Maintenance at the end of the season (when not in use for a long time, remember to drain the water and cut off the power supply.) To prevent freezing damage to the body and mosquito breeding, when not using it for a long time, turn off the tap water, then press the cleaning button to drain the water and cut off the power supply. . The inside of the unit must be clean. If the unit operates for a long time, in order to ensure the cooling effect, the inside of the unit must be cleaned once every 1 or 2 months.

　　Household cooling fan maintenance method 2

　　Remove the wet curtain (there are four parts in total, in no particular order.) First unscrew the three screws on the upper part of the wet curtain. Hold the louver on the upper part of the wet curtain, gently pull the wet curtain outward and then lift it up slightly to remove the wet curtain; remove the top cover and water distribution pipe assembly. First unscrew the screws on the top cover, then lift the top cover up and take it off. Unscrew the hose clamp on the water pipe and loosen the water pipe. Lift up the water distribution pipe assembly and remove it. To clean the water distribution pipe, if the hole in the water distribution pipe is blocked, you can poke it out with an iron wire. Use clean water to clean the stains on the water pipe.

　　Maintenance method three for household cooling fans

　　Cleaning of chassis and accessories. To clean the chassis, use a soft cloth or brush to clean the chassis. To clean the fan blades, wipe them with a soft cloth. Be careful not to let dust on the fan blades fall into the air duct. To clean the water level sensor, use a small damp cloth to remove any dirt on the water level. To clean the water pump, use a brush to clean the dirt on the water pump and its filter. Clean the clothes drain valve and pay attention to the dirt on the bottom of the drain valve.

　　This is a brief introduction on how to maintain household cooling fans. I hope it will be helpful to everyone. To learn more about factory cooling and ventilation cooling, please contact Keruilai Quality.